Kia EV6: Controls and features / Windshield defrosting and defogging

Kia EV6 2022-2026 Owner's Manual / Controls and features / Windshield defrosting and defogging

Contents:

When the Kia EV6 windshield becomes covered with frost, fog, or interior moisture, visibility may be reduced and the windshield should be cleared immediately before driving.

WARNING

Windshield Heating

Do not use the () or () airflow positions during cooling operation in extremely humid weather conditions. The difference between outside temperature and windshield surface temperature may cause the exterior side of the windshield to fog, reducing visibility.

In this situation, set the Kia EV6 airflow mode to the () position and reduce the fan speed to a lower setting.

For maximum Kia EV6 windshield defrosting performance, set the temperature control to the highest heat setting and adjust the fan speed to the maximum level.
If warm air in the footwell area is preferred during defrosting or defogging, select the Kia EV6 floor-defrost airflow mode.
Before driving, completely remove snow and ice from the Kia EV6 windshield, rear glass, side windows, and outside mirrors.
Clear all snow, leaves, and ice from the hood air intake grille area to improve Kia EV6 heater efficiency and reduce the likelihood of interior windshield fogging.

Defrosting outside windshield with automatic climate control

Kia EV6 automatic climate control windshield defrost function

Set the Kia EV6 blower fan speed to the maximum level.
Adjust the temperature setting to the highest heat position (HI).
Press the windshield defroster button ().
The Kia EV6 climate system automatically switches to Fresh Air mode and activates the air conditioning system according to the detected outside temperature.

Defogging inside windshield with automatic climate control

Kia EV6 automatic windshield defogging climate control operation

Set the Kia EV6 fan speed to the desired airflow level.
Select the preferred cabin temperature.
Press the windshield defroster button ().
The Kia EV6 climate system automatically switches to Fresh Air mode and activates the air conditioning system based on ambient temperature conditions.

If the Kia EV6 air conditioning system and Fresh Air intake mode are not selected automatically, adjust the controls manually.

If the () mode is selected, the fan speed automatically increases for improved windshield clearing performance.

Defogging logic: (if equipped) ➤

Auto Defogging System (ADS) ➤

Automatic ventilation

The Kia EV6 automatic ventilation system automatically switches to the outside (fresh) air intake position when the climate control system operates for a certain period of time, approximately 5 minutes, in low-temperature conditions while recirculation mode is selected.

This Kia EV6 feature helps maintain fresh cabin air circulation and reduces excessive moisture buildup inside the vehicle.

Defroster

Defogging logic: (if equipped)

Other information:

Kia EV6 2022-2026 Owner's Manual: Before driving

Before operating the Kia EV6, make sure that all passengers are wearing their seat belts properly and securely. Sit in an upright driving position and position yourself slightly closer to the steering wheel than in a conventional vehicle. Adjust the steering wheel and seating position until you achieve a comfortable and controlled driving posture for the Kia EV6.

Kia EV6 2022-2026 Owner's Manual: Low EV battery

Low EV battery When the Kia EV6 high-voltage battery charge level reaches approximately 20% (25% for the standard battery type) or lower, this warning message appears on the instrument cluster. At the same time, the warning light () illuminates to alert the driver that the remaining driving range is becoming limited.