Contents:
|
The Kia EV6 Safe Exit Warning (SEW) system is designed to help reduce the risk of accidents when passengers exit the vehicle.
While the Kia EV6 is stopped, Safe Exit Warning can monitor vehicles approaching from the rear side area and provide visual and audible warnings if a passenger attempts to open a door when a potential collision risk is detected.
The Kia EV6 Safe Exit Warning system helps improve awareness in crowded urban streets, parking areas, roadside stops, and heavy traffic conditions where rear-side visibility may be limited.
CAUTION
The timing of Kia EV6 Safe Exit Warning alerts may vary depending on the speed, direction, and distance of approaching vehicles.
Detection sensor
Please refer to the Detecting Sensor(s) section for detailed information regarding the applicable Kia EV6 sensors and their installation locations.
The Kia EV6 Safe Exit Warning system primarily uses rear corner radar sensors to monitor approaching vehicles near the rear side area of the vehicle.
CAUTION
For additional information regarding Kia EV6 rear corner radar operation and limitations, refer to the Blind-Spot Collision-Avoidance Assist (BCA) section.
Kia EV6 2022-2026 Owner's Manual: Lane Following Assist (LFA)
The Kia EV6 Lane Following Assist (LFA) system is designed to help keep the vehicle centered within its lane while driving. The Kia EV6 Lane Following Assist system detects visible lane markings and/or vehicles ahead using the front view camera and assists with steering control to help maintain stable lane positioning. This Kia EV6 driver assistance technology is especially helpful during highway driving, long-distance travel, and moderate traffic conditions.Kia EV6 2022-2026 Owner's Manual: Navigation-based Smart Cruise Control limitations
Navigation-based Smart Cruise Control in the Kia EV6 may operate abnormally, pause unexpectedly, or provide delayed speed assistance under the following circumstances. Because this system depends on navigation data, GPS positioning, map accuracy, road recognition, and Smart Cruise Control operation, the driver must always monitor the road and remain ready to control speed manually.