Contents:
|
|
If the Kia EV6 Safe Exit Warning system is not functioning correctly, a warning message will appear on the
instrument
cluster for several seconds together with the Master Warning light (
).
If a malfunction is detected in the Kia EV6 Safe Exit Warning system, an additional warning notification may
appear
on the cluster display and the Master Warning light (
) will remain illuminated.
These warnings indicate that the Kia EV6 Safe Exit Warning system may require inspection, calibration, or service.
If the Kia EV6 Safe Exit Warning system does not operate normally, have the vehicle inspected by an authorized Kia dealer as soon as possible.
The Kia EV6 Safe Exit Warning system depends on rear corner radar sensors, mirror warning indicators, and electronic control modules to monitor approaching vehicles near the rear side area.
Have the Kia EV6 Safe Exit Warning system inspected by an authorized Kia dealer whenever a warning message remains active or system operation becomes abnormal.
|
|
If the Kia EV6 outside rear view mirror warning indicator does not operate properly, a warning message will
appear on
the instrument cluster for several seconds together with the Master Warning light (
).
Proper operation of the Kia EV6 mirror warning indicators is essential for Safe Exit Warning performance and rear-side hazard detection.
If this condition occurs, have the Kia EV6 Safe Exit Warning system inspected by an authorized Kia dealer.
Safe Exit Warning disabled
If the Kia EV6 rear bumper area around the rear corner radar sensors becomes covered with foreign material such as snow, ice, mud, rain, slush, or road debris, the detection performance of Safe Exit Warning may become temporarily limited or disabled.
Installing accessories such as a trailer, bicycle rack, cargo carrier, or other rear-mounted equipment near the Kia EV6 rear bumper may also interfere with radar detection performance.
|
|
Under these conditions, the Kia EV6 instrument cluster may display a warning message together with the Master
Warning
light (
).
In most situations, this does not indicate a permanent malfunction of the Kia EV6 Safe Exit Warning system.
The Kia EV6 Safe Exit Warning system should resume normal operation after foreign material is removed from the sensors or any obstruction such as a trailer or carrier is removed from the rear bumper area.
After cleaning the sensors or removing the obstruction, restart the Kia EV6 to allow the system to reinitialize correctly.
If the Kia EV6 Safe Exit Warning system still does not operate properly after cleaning the sensors or removing the obstruction, have the vehicle inspected by an authorized Kia dealer.
WARNING
Even if no warning message appears on the Kia EV6 instrument cluster, Safe Exit Warning may still not operate properly.
The Kia EV6 Safe Exit Warning system may not function correctly in open terrain or environments where surrounding objects are not easily detected immediately after vehicle startup.
If the Kia EV6 rear corner radar sensors remain blocked by snow, rain, mud, dirt, or debris immediately after startup, detection performance may become temporarily limited.
Heavy weather conditions such as snowstorms, dense fog, or intense rainfall may temporarily reduce Kia EV6 radar sensor effectiveness.
Always visually check surrounding traffic conditions before opening the doors of the Kia EV6, even when Safe Exit Warning is active.
NOTE
You can check the Kia EV6 Safe Exit Warning system status through the service message section of the utility information display on the instrument cluster.
CAUTION
Turn OFF the Kia EV6 Safe Exit Warning system before installing or removing a trailer, carrier, bicycle rack, or other rear attachment.
Turn Safe Exit Warning back ON after installation or removal is complete and verify proper system operation.
The Kia EV6 Safe Exit Warning system may not operate normally or may provide delayed or unexpected warnings under certain environmental or driving conditions.
Exiting the Kia EV6 in areas where trees, bushes, or tall grass are overgrown near the roadway.
Exiting the Kia EV6 on wet roads, reflective pavement, or slippery surfaces.
An approaching vehicle is traveling at very high speed.
Heavy rain, snow, fog, or poor visibility conditions interfere with Kia EV6 radar sensor detection.
The Kia EV6 rear corner radar area is obstructed by dirt, mud, snow, or accessories mounted near the bumper.
NOTE
For additional information regarding Kia EV6 rear corner radar operation and limitations, refer to the Blind-Spot Collision-Avoidance Assist (BCA) section.
WARNING
The Kia EV6 Safe Exit Warning system may not operate correctly if affected by strong electromagnetic interference.
Kia EV6 Safe Exit Warning may require approximately 3 seconds to initialize after restarting the vehicle or reactivating the rear corner radar sensors.
Even after restarting the Kia EV6, Safe Exit Warning may continue to operate abnormally if the obstruction or malfunction condition persists.
Never rely solely on Kia EV6 Safe Exit Warning when exiting the vehicle. Always directly check surrounding traffic and road conditions.
The electronic systems installed in the Kia EV6 comply with Part 15 of the FCC Rules and are designed to meet modern electromagnetic compatibility standards.
Operation of the Kia EV6 electronic equipment is subject to the following two conditions:
This device may not cause harmful interference to other electronic or communication systems, and
this device must accept any interference received, including interference that could cause undesired operation of certain Kia EV6 functions.
TIP
Changes, modifications, or unauthorized alterations not expressly approved by the party responsible for compliance could void the user’s authority to operate the Kia EV6 electronic equipment.
