Rear Cross-Traffic Collision-Avoidance Assist in the Kia EV6 is designed to detect vehicles approaching from the
rear
left or rear right side while reversing. The system warns the driver of a potential collision through visual
alerts,
warning messages, and audible notifications. In certain situations, the Kia EV6 RCCA system may also apply brake
assistance automatically to help reduce the risk of a rear cross-traffic collision during parking maneuvers.
Rear Cross-Traffic Collision Warning operating range
Rear Cross-Traffic Collision-Avoidance Assist operating range
CAUTION
The warning timing of the Kia EV6 RCCA system may vary depending on the speed and direction of the
approaching
vehicle.
Detection sensor
Please refer to Detecting sensor(s) for information regarding the applicable sensors and radar locations used by
the
Kia EV6 Rear Cross-Traffic Collision-Avoidance Assist system.
NOTE
For more detailed information regarding the rear corner radar sensors, refer to Blind-spot
Collision-avoidance
Assist (BCA) in the Kia EV6 owner’s manual.
When the airbags in the Kia EV6 deploy, a loud noise will be heard and smoke or powder may appear inside the
cabin.
This is a normal result of the airbag inflator operation and does not indicate a fire.
Following deployment, occupants may experience temporary breathing discomfort caused by the force of the seat
belt,
airbag deployment, and exposure to the harmless smoke and powder released during inflation.
The Rear View Monitor image remains active when the following conditions are satisfied:
The gear is shifted from R (Reverse) to N (Neutral) or D (Drive).
The Kia EV6 speed remains below approximately 6 mph (10 km/h).
Non-operating conditions
The Extended Rear View Monitor turns OFF under the following conditions:
The gear is shifted to P (Park).