Kia K4: Seats / Front seat adjustment for power seat:
Contents:
- Moving forward and backward
- Reclining seatback
- Changing seat cushion tilt and height
- Adjusting lumbar support:
The Kia K4 features intuitive power-operated driver's seat adjustments, controlled via the switches mounted on the outboard side of the seat cushion. Before operating your Kia K4, always configure your seat to a position that provides effortless access to the steering wheel, foot pedals, and all instrument panel controls to ensure safe and attentive driving.
WARNING
Unattended children safety
Never leave children unattended inside the vehicle. Children can inadvertently operate power seat controls, which may result in pinch injuries or other hazardous situations.
NOTE
Power seating system longevity
- The power seating adjustments in the Kia K4 are motor-driven. Frequent, unnecessary adjustment may cause premature wear on the electrical motors and associated components.
- To prevent overloading the electrical system, do not activate two or more power seat control switches simultaneously. Simultaneous operation can cause electrical surges that might damage the motor or internal circuitry.
Moving forward and backward
 |
To adjust the longitudinal position of your Kia K4 seat:
- Slide the main control switch forward or backward to reposition the seat along the floor tracks.
- Release the switch immediately once the Kia K4 seat has reached your preferred distance from the steering wheel.
Reclining seatback
|
|
To adjust the backrest angle in your Kia K4:
- Push the recline control switch forward or backward to achieve your desired torso angle.
- Release the switch once the Kia K4 seatback is properly positioned for comfort and safety.
Changing seat cushion tilt and height
|
|
To customize the cushion height and tilt of your Kia K4 front seat:
- Pull the front portion of the switch upward to raise the front cushion, or press it down to lower it.
- Pull the rear portion of the switch upward to raise the rear of the seat cushion, or press it down to lower the rear.
- Release the switch once the Kia K4 seat is correctly balanced and at the desired height.
Adjusting lumbar support:
|
|
Optimize your back comfort in the Kia K4 by using the dedicated lumbar support switch located on the side of the seat:
- Press the front section of the switch to increase lumbar firmness and projection.
- Press the rear section of the switch to decrease lumbar pressure.
- Release the switch once the support level meets your personal comfort requirements.
Other information:
Kia K4 (CL4) 2025-2026 Owner's Manual: Recommended Lubricants and Capacities for Kia K4
To help achieve proper engine and powertrain performance, maximum fuel efficiency, and long-term mechanical durability for your vehicle, use only the explicitly correct lubricants. Selecting the right fluids for your Kia K4 also promotes optimal engine thermal efficiency, which directly improves fuel economy and reduces emissions. Always ensure the following certified high-grade lubricants and technical fluids are utilized during your Kia K4 routine maintenance cycles: Fluid / Lubricant Type Fill Capacity (Volume) Industry Standard / Classification Engine Oil(Complete drain and oil filter refill volume) Smartstream G2.Kia K4 (CL4) 2025-2026 Owner's Manual: ENGINE START/STOP button
The ENGINE START/STOP button in your Kia K4 is designed for convenience; it automatically illuminates whenever a front door is opened. The light will remain active for approximately 30 seconds after the door is closed. Furthermore, the illumination will deactivate immediately once the Kia K4 theft-alarm system is successfully armed. Your Kia K4 features four distinct ignition modes, allowing you to manage vehicle power and engine status effortlessly.
