Kia EV6: Maintenance / Washer Fluid
Contents:
Washer fluid is used whenever the windshield wipers clean the windshield of the Kia EV6. Maintaining an adequate supply of washer fluid helps ensure clear visibility in rain, snow, dust, mud, and other driving conditions.
Inspect the washer fluid level regularly and refill the reservoir whenever necessary to ensure uninterrupted operation of the windshield cleaning system.
Checking the Washer Fluid Level
|
The washer fluid reservoir on the Kia EV6 is manufactured from translucent material, allowing the fluid level to be checked quickly through visual inspection.
-
Check the washer fluid level regularly and refill as necessary. If dedicated washer fluid is unavailable, clean water may be used temporarily. In cold climates, however, a washer fluid containing antifreeze protection should always be used to help prevent freezing.
WARNING
Flammable Fluid
Do not expose windshield washer fluid to open flames, sparks, cigarettes, or other ignition sources. Under certain conditions, washer fluid may be flammable and could cause a fire.
WARNING
Coolant
-
Never use radiator coolant or engine antifreeze inside the windshield washer reservoir of the Kia EV6.
-
Coolant sprayed onto the windshield may severely reduce visibility and increase the risk of losing vehicle control.
WARNING
Windshield Fluid
Do not drink windshield washer fluid. Washer fluid is poisonous and may cause serious injury or death if swallowed by humans or animals.
Other information:
Kia EV6 2022-2026 Owner's Manual: Reverse Parking Collision-Avoidance Assist (PCA): (if equipped)
Reverse Parking Collision-Avoidance Assist (PCA) in the Kia EV6 is designed to help enhance safety while reversing. Using advanced sensors and monitoring technology, the system can detect pedestrians, obstacles, and potential hazards behind the vehicle. When a collision risk is identified, the Kia EV6 may provide visual and audible warnings and, if necessary, automatically apply braking assistance to help reduce the likelihood of an impact.To enable the Kia EV6 Smart Liftgate with Auto Open feature, navigate to Setup > Vehicle > Door > Smart Liftgate with Auto Open within the infotainment system settings menu. 2. Detect and Alert If you stand within the detection zone located approximately 20–40 inches (50–100 cm) behind the Kia EV6 while carrying the smart key, the hazard warning lights will flash and a warning chime will sound.
Contents
Categories
- Manuals Home
- Kia EV6 Owners Manual
- Questions & Answers
- Video Guides
- Useful Resources
- New on site
- Most important about Kia EV6
- Privacy Policy
