Kia EV6: What to Do in an Emergency / Towing

Kia EV6 2022-2026 Owner's Manual / What to Do in an Emergency / Towing

Contents:

Towing Service

Kia EV6 recommended towing method using wheel dollies and flatbed transport

Wheel dollies

If the Kia EV6 requires towing, the procedure should be performed by an authorized Kia dealer or a professional towing service equipped to handle electric vehicles.

Following the correct lifting and transportation procedures is essential to prevent damage to the electric powertrain, suspension, battery system, and drivetrain components.

WARNING

Side and Curtain Airbags

If the Kia EV6 is equipped with side and curtain airbags, place the EV button in the OFF position before towing begins.

If the vehicle remains in the POWER ON mode, the rollover detection system could interpret towing movement as a rollover event and trigger unintended airbag deployment.

CAUTION

AWD-equipped Kia EV6 models must never be towed with any wheels in contact with the ground. Always transport the vehicle using a flatbed tow truck or wheel dollies. Failure to do so may cause severe damage to the electric drive system and all-wheel-drive components.

NOTE

The Kia EV6 should not be towed with its tires rolling on the road surface. Flatbed transport or wheel dollies are strongly recommended.

If the Electronic Parking Brake (EPB) cannot be released normally, load the Kia EV6 onto a flatbed tow truck and have the braking system inspected by an authorized Kia dealer.

When a Flatbed Tow Truck Is Unavailable

Kia EV6 emergency towing procedure when flatbed truck is unavailable

A 2WD Kia EV6 may be towed with the non-driven wheels on the ground and without wheel dollies when absolutely necessary. Before switching the vehicle off, ensure the parking brake has been released.

If towing on only two wheels is unavoidable, always lift the driven wheels completely off the ground.

CAUTION

If any wheel, tire, axle, or suspension component has sustained damage, or if the driven wheels must remain on the ground, use towing dollies underneath the driven wheels.

Never tow the Kia EV6 using sling-type towing equipment. Wheel-lift equipment or a flatbed carrier should always be used.

Do not tow the Kia EV6 forward with the driven wheels touching the road surface, as serious drivetrain damage may occur.

Precautions for Using Towing Hooks During Short-Distance Vehicle Movement

When repositioning the Kia EV6 before loading it onto a tow truck, keep the vehicle speed below 3 mph (5 km/h) and limit travel distance to no more than 32 ft (10 m).

Shift the transmission into N (Neutral) and release the parking brake before moving the vehicle.

If the electric drive system or parking brake is not functioning correctly, all four wheels should be lifted using towing dollies or tire skates before moving the Kia EV6.

Using the Removable Towing Hook

Kia EV6 removable towing hook stored in vehicle tool kit

Kia EV6 front towing hook installation point — Figure 1. Front

Kia EV6 rear towing hook installation point — Figure 2. Rear

Open the liftgate of the Kia EV6 and remove the towing hook from the vehicle tool kit.
Remove the towing-eye cover by pressing the lower section of the bumper cover opening.
Install the towing hook by rotating it clockwise until it is fully tightened and securely seated.
After use, remove the towing hook and reinstall the protective cover.

If You Have a Flat Tire (with Tire Mobility Kit)

Maintenance

Other information:

Kia EV6 2022-2026 Owner's Manual: Auto LOCK Enable on speed

When this convenience feature is activated through the Kia EV6 infotainment system, all vehicle doors automatically lock once the vehicle speed exceeds approximately 9 mph (15 km/h). The automatic speed-sensitive locking system of the Kia EV6 is designed to improve passenger safety and enhance overall vehicle security while driving. Drivers can activate or deactivate the automatic door locking and unlocking functions according to their personal preferences.

Kia EV6 2022-2026 Owner's Manual: Child restraint system types

There are three primary categories of child restraint systems designed for use in the Kia EV6: rear-facing child seats, forward-facing child restraints, and booster seats. Each type is specifically engineered according to a child’s age, height, weight, and developmental stage to provide the highest level of passenger protection during travel.