Kia EV6: Driving your vehicle / Smart regeneration system will be temporarily canceled when:

Kia EV6 2022-2026 Owner's Manual / Driving your vehicle / Smart regeneration system will be temporarily canceled when:

Contents:

Canceled manually

The Smart Regeneration System temporarily turns off and the AUTO regenerative braking indication disappears from the Kia EV6 cluster display.

Pull and hold the right-side paddle shifter for longer than 0.5 second.
Canceled automatically
- The vehicle is shifted into N (Neutral), R (Reverse), or P (Park).
- Smart Cruise Control becomes active.
- The ESC (Electronic Stability Control) or ABS system is operating.
- Snow driving mode is activated.

NOTE

If the smart regeneration system is automatically canceled, the driver should directly regulate the Kia EV6 speed using the accelerator or brake pedal according to traffic conditions and road visibility ahead.

Resuming smart regeneration system

To reactivate the Smart Regeneration System while driving the Kia EV6:

Pull and hold the right-side paddle shifter again for more than 0.5 second.
The AUTO regenerative braking level indicator will reappear on the cluster display.

Turning smart regeneration system off

To completely disable the system:

Pull and hold the right-side paddle shifter for longer than 0.5 second.

Vehicle-to-vehicle distance recognition sensor

For the Kia EV6 Smart Regeneration System to function correctly and deliver accurate regenerative braking adjustments, the front radar sensor cover must always remain clean and unobstructed.

Accumulated dirt, snow, ice, mud, or road debris on the radar lens can negatively affect sensor operation and may reduce system performance. Under these conditions, the Smart Regeneration System may stop functioning properly or operate with limited capability.

Kia EV6 front radar sensor location and vehicle-to-vehicle distance recognition system — Figure 1. Front radar

CAUTION

Do not install license plate frames, bumper stickers, decorative accessories, or bumper guards near the radar sensor area, as these components may interfere with the performance of the Kia EV6 radar system.

Always ensure the radar sensor and sensor lens cover remain clean and free from contamination or debris.

Use only a soft cloth and gentle washing methods when cleaning the vehicle. Avoid directing high-pressure water streams toward the radar sensor or sensor cover.

Avoid applying excessive force to the radar sensor or its cover. If the sensor alignment is altered, the Kia EV6 Smart Regeneration System may not operate correctly, even if no warning message appears on the cluster. Have the system inspected by an authorized Kia dealer if damage or misalignment is suspected.

If the front bumper area surrounding the radar sensor becomes damaged, the Smart Regeneration System may fail to operate normally. Inspection by an authorized Kia dealer is recommended.

Genuine Kia radar sensor covers are engineered to meet strict quality and performance standards. Repainting, modifying, or replacing the cover with non-approved components may negatively affect Forward Collision-Avoidance Assist (FCA) and other driver assistance systems. Always use Kia Genuine Parts or equivalent certified components for repairs or replacements.

System malfunction

The following warning message may appear if the Kia EV6 Smart Regeneration System is not operating correctly or if the radar-based regenerative braking assistance encounters an issue.

Check Smart Regeneration System

This message appears whenever the Smart Regeneration System in the Kia EV6 fails to function as intended. Once the malfunction is detected, the system will automatically deactivate, the AUTO indication disappears from the cluster, and the display switches back to the currently selected regenerative braking level.

Inspect the front radar sensor area carefully for dirt, snow, ice, mud, or any foreign materials that could obstruct sensor operation. Remove any contamination that may interfere with the radar functionality. If the Kia EV6 Smart Regeneration System still does not return to normal operation after cleaning the sensor area, have the vehicle inspected by an authorized Kia dealer for professional diagnosis and repair.

Limitations of the system

The Kia EV6 Smart Regeneration System may not function properly under certain road, weather, or traffic conditions when the surrounding environment exceeds the operational limitations of the front radar sensor.

Drivers should remain attentive at all times because the system may occasionally react unexpectedly or fail to respond appropriately depending on driving conditions.

Smart regeneration system

Brake system

Other information:

Kia EV6 2022-2026 Owner's Manual: Interior lights

The Kia EV6 is equipped with multiple interior lighting elements designed to improve cabin visibility, convenience, and premium atmosphere throughout the vehicle interior. Avoid using the Kia EV6 interior lights for extended periods while the vehicle is switched OFF. Extended operation of interior lighting may discharge the 12V auxiliary battery.

Kia EV6 2022-2026 Owner's Manual: 1. Getting ready for parking

With the Kia EV6 powered on, firmly press the brake pedal and shift the transmission into D (Drive) or N (Neutral). Press and hold the Parking/View button () to activate Remote Smart Parking Assist. NOTE You must select Agree on the infotainment display, and the infotainment system must be operating normally before the Kia EV6 Parking function can be used.