Contents:
|
Press the Parking Safety (
) button to activate the Kia EV6 Forward, Side, and Reverse
Parking
Distance Warning functions. Press the button again to deactivate the system.
When the gear selector is shifted into R (Reverse), the Kia EV6 Parking Distance Warning system automatically turns ON and the Parking Safety indicator illuminates.
The Kia EV6 Forward Parking Distance Warning system operates whenever one of the following conditions is satisfied:
The gear selector is shifted from R (Reverse) into D (Drive) while Reverse Parking Distance Warning remains active.
The gear selector is in D (Drive) and the Parking Safety (
) button indicator remains illuminated.
Forward Parking Distance Warning provides alerts while driving in D (Drive).
(If Setup > Vehicle > Driver Assistance > Parking Safety > Parking Distance Warning Auto On is selected within the Kia EV6 infotainment system.)
NOTE
The Kia EV6 Forward Parking Distance Warning system operates only when vehicle speed is below 6 mph (10 km/h).
When the Kia EV6 is in R (Reverse), no warning is issued for objects positioned directly inside the front detection area. Only objects located outside the front area within approximately 24 in (60 cm) will trigger a warning.
If Parking Distance Warning Auto On is disabled, the Kia EV6 Forward Parking Distance Warning system automatically deactivates when vehicle speed exceeds 20 mph (30 km/h), indicated by the Parking Safety button turning OFF.
Kia EV6 2022-2026 Owner's Manual: If the distance to empty is insufficient
If the Kia EV6 battery warning light turns ON, recharge the vehicle as soon as possible at the nearest available charging station. Drive efficiently according to the recommended operating tips for improving Kia EV6 driving range and energy efficiency. If the remaining battery level reaches 0%, avoid driving unnecessarily and move the Kia EV6 to a safe location before requesting assistance.Press the latch release button (1) on the CCS1 charging connector and insert the connector securely into the adapter (2) until it locks completely into place. Insert the CCS1 adapter into the NACS-equipped vehicle charging inlet and verify the charging connection status using the charging station display or charging system indicators.