Kia EV6: Brake disc cleaning / Electronic Parking Brake (EPB)

When parking on steep inclines or while towing a trailer, additional parking brake force may be required to keep the Kia EV6 securely stationary.

1. Apply the EPB.

2. Pull and hold the EPB switch upward for longer than 3 seconds.

During operation or release of the EPB, you may hear clicking sounds or electric motor noises coming from the braking system.

These sounds are completely normal and indicate that the Electronic Parking Brake system in the Kia EV6 is functioning correctly.

• Never allow children, passengers, or animals to touch the Electronic Parking Brake controls in the Kia EV6.

• Do not place objects near the Electronic Parking Brake switch, as unintended activation may occur.

• For additional safety, the EPB can still be applied even when the EV button is in the OFF position. However, it cannot be released until the system is powered on again.

• When driving downhill or reversing the Kia EV6, always depress the brake pedal and manually release the parking brake using the EPB switch for maximum vehicle control.

• If the parking brake warning light remains illuminated after the EPB has been released, have the Kia EV6 inspected by an authorized Kia dealer immediately.

• Never drive the Kia EV6 with the EPB engaged, as this may cause accelerated brake pad and brake rotor wear.

• Whenever parking or leaving the vehicle unattended, ensure the shifter dial is securely positioned in P (Park) and fully apply the parking brake. Use wheel blocks if necessary.

• During winter conditions, the Electronic Parking Brake may freeze and fail to release. In extremely cold weather, avoid using the EPB whenever possible. Instead, shift the Kia EV6 into P (Park), block the wheels, and park on a flat and secure surface.

• If the Electronic Parking Brake remains applied while driving, the brake system may overheat, brake lines may wear prematurely, and the EPB mechanism itself may become damaged.

• If the auxiliary battery charge becomes insufficient, the Electronic Parking Brake may fail to apply or release correctly. In this situation, recharge or connect the auxiliary battery.

• If you notice continuous noise, smoke, or a burning smell while using the EPB for emergency braking, have the Kia EV6 inspected by an authorized Kia service center immediately.

• If the gear is shifted into N (Neutral) while the Electronic Parking Brake is active, the system will not release automatically. Failing to manually release the EPB before entering an automatic car wash tunnel may cause damage to the vehicle or the car wash equipment.

On Kia EV6 vehicles equipped with the AUTO HOLD function, if the EV button is switched OFF while driving, the EPB will automatically engage. The AUTO HOLD function should be manually turned off before shutting down the vehicle.

• To prevent unintended vehicle movement when parked, never rely solely on the shifter dial. Always fully engage the parking brake and ensure the Kia EV6 is securely positioned in P (Park).

• Never allow anyone unfamiliar with the Kia EV6 to operate the EPB switch. Accidental release of the parking brake may lead to severe injury or death.

• All vehicles should always have the parking brake fully engaged while parked in order to prevent unexpected vehicle movement that may endanger occupants or pedestrians.

• Clicking sounds or electric motor noises may be heard while operating or releasing the EPB. These sounds are normal operating characteristics and indicate proper Electronic Parking Brake function in the Kia EV6.

• If another driver uses the vehicle, ensure they fully understand proper operation of the Electronic Parking Brake system.

• The EPB system may malfunction if the Kia EV6 is driven while the parking brake remains applied.

• When automatically releasing the EPB using the accelerator pedal, always press the accelerator gradually and smoothly.

Depress the brake pedal immediately if the above message appears, as the AUTO HOLD and EPB functions may fail to activate correctly.

Under normal conditions, the warning light should turn off and the EPB switch should resume proper operation. If the EPB warning light remains illuminated, have the Kia EV6 checked by an authorized Kia dealer immediately.

If the parking brake warning light does not illuminate, or flashes even though the EPB switch has been pulled upward, the Electronic Parking Brake may not have been fully applied.

If the parking brake warning light flashes while the EPB warning indicator remains on, press the EPB switch downward and then pull it upward again.

Return the switch to its original position and pull it upward once more. If the EPB warning indicator still does not turn off, have the Electronic Parking Brake system inspected by an authorized Kia service center.

Never operate the Electronic Parking Brake while the Kia EV6 is moving unless it is absolutely necessary during an emergency situation. Activating the Electronic Parking Brake at normal driving speeds may result in sudden loss of vehicle control. If emergency braking is unavoidable, apply the EPB carefully and progressively.

During emergency braking using the EPB, the parking brake warning light will illuminate to indicate that the emergency braking system is currently active.