Kia EV6: Maintenance / Washer Fluid
Contents:
Washer fluid is used whenever the windshield wipers clean the windshield of the Kia EV6. Maintaining an adequate supply of washer fluid helps ensure clear visibility in rain, snow, dust, mud, and other driving conditions.
Inspect the washer fluid level regularly and refill the reservoir whenever necessary to ensure uninterrupted operation of the windshield cleaning system.
Checking the Washer Fluid Level
|
The washer fluid reservoir on the Kia EV6 is manufactured from translucent material, allowing the fluid level to be checked quickly through visual inspection.
-
Check the washer fluid level regularly and refill as necessary. If dedicated washer fluid is unavailable, clean water may be used temporarily. In cold climates, however, a washer fluid containing antifreeze protection should always be used to help prevent freezing.
WARNING
Flammable Fluid
Do not expose windshield washer fluid to open flames, sparks, cigarettes, or other ignition sources. Under certain conditions, washer fluid may be flammable and could cause a fire.
WARNING
Coolant
-
Never use radiator coolant or engine antifreeze inside the windshield washer reservoir of the Kia EV6.
-
Coolant sprayed onto the windshield may severely reduce visibility and increase the risk of losing vehicle control.
WARNING
Windshield Fluid
Do not drink windshield washer fluid. Washer fluid is poisonous and may cause serious injury or death if swallowed by humans or animals.
Other information:
Towing Service Wheel dollies If the Kia EV6 requires towing, the procedure should be performed by an authorized Kia dealer or a professional towing service equipped to handle electric vehicles. Following the correct lifting and transportation procedures is essential to prevent damage to the electric powertrain, suspension, battery system, and drivetrain components.Pull and hold the left-side ( ) Kia EV6 paddle shifter while coasting. When the Kia EV6 speed exceeds approximately 2 mph (3 km/h), the regenerative braking level returns to the previously selected setting after the paddle shifter is released. When the Kia EV6 speed drops below approximately 2 mph (3 km/h), vehicle stopping control remains active even after the paddle shifter is released.
Contents
Categories
- Manuals Home
- Kia EV6 Owners Manual
- Questions & Answers
- Video Guides
- Useful Resources
- New on site
- Most important about Kia EV6
- Privacy Policy
