Kia EV6: Seat belts / Seat belts - front passenger and rear seat 3-point system with combination locking retractor

Kia EV6 2022-2026 Owner's Manual / Seating and safety restraints / Seat belts / Seat belts - front passenger and rear seat 3-point system with combination locking retractor

Contents:

The following section explains the proper fastening and operation of the Kia EV6 front passenger and rear seat belt systems.

The Kia EV6 combination locking retractor seat belt system is designed to improve occupant safety while also supporting proper child restraint system installation.

Fastening the seat belt

Combination locking retractor seat belts are installed in the Kia EV6 rear seating positions to assist with secure child restraint system installation.

Although the Kia EV6 front passenger seat is also equipped with a combination locking retractor, children should always ride in the rear seats whenever possible.

NEVER install a rear-facing infant restraint system in the Kia EV6 front passenger seat.

This Kia EV6 seat belt system combines both Emergency Locking Retractor (ELR) and Automatic Locking Retractor (ALR) functions.

Pull the Kia EV6 seat belt from the retractor and insert the metal latch tab into the buckle.

An audible “click” sound confirms that the seat belt has locked securely into the buckle.

When not being used for child restraint installation, the Kia EV6 seat belt functions in the same manner as the driver’s emergency locking retractor system.

The Kia EV6 seat belt automatically adjusts to the proper length after the lap belt portion has been manually positioned snugly across the hips.

When the Kia EV6 seat belt is fully extended from the retractor to secure a child restraint system, the locking mechanism changes to Automatic Locking Retractor (ALR) mode.

In this mode, the Kia EV6 seat belt retracts but cannot extend again until fully released and reset.

Refer to the Kia EV6 Child Restraint System (CRS) section for detailed child seat installation instructions.

CAUTION

Do NOT fold the left portion of the Kia EV6 rear seatback while the rear center seat belt remains buckled.

ALWAYS unbuckle the Kia EV6 rear center seat belt before folding the left rear seatback.

If the rear center seat belt remains fastened while the left seatback is folded, distortion or damage to the seatback trim, seat belt garnish, or locking mechanism may occur.

This may also cause the Kia EV6 rear seatback to remain stuck in the folded position.

NOTE

Although the Kia EV6 combination locking retractor provides the same level of protection in both emergency locking and automatic locking modes, seated passengers should normally use the emergency locking mode for greater comfort and convenience.

The automatic locking feature is primarily intended for secure child restraint installation.

To return the Kia EV6 seat belt system from automatic locking mode to emergency locking operation, allow the unbuckled seat belt to retract fully into the retractor.

The Kia EV6 seat belt latch must always be inserted into the correct buckle corresponding to the seating position.

Kia EV6 rear seat belt buckle positions and seating arrangement illustration

Rear right seat belt fastening buckle
Rear center seat belt fastening buckle
Rear left seat belt fastening buckle

WARNING

Before fastening the Kia EV6 rear seat belts, always verify that the latch plate matches the correct seat belt buckle.

Forcefully connecting the left or right rear seat belt into the center buckle may create an improper fastening condition that cannot provide proper occupant protection during an accident.

When using the Kia EV6 rear center seat belt, always use the buckle clearly marked with the "CENTER" label.

Kia EV6 rear center seat belt buckle with CENTER identification marking

Releasing the seat belt

Kia EV6 seat belt release button and buckle unlocking procedure

The Kia EV6 seat belt is released by pressing the release button (1) located on the seat belt buckle.

After release, the Kia EV6 seat belt should automatically retract smoothly back into the retractor housing.

If the seat belt does not retract normally, inspect the Kia EV6 seat belt webbing to ensure it is not twisted or obstructed, then try again.

The Kia EV6 seat belt retractor system is designed to maintain proper belt storage, improve occupant convenience, and help prevent belt twisting during everyday vehicle use.

Seat belt - driver’s 3-point system with emergency locking retractor

Infant or small child

Other information:

Kia EV6 2022-2026 Owner's Manual: Warning indicator and warning sound

Distance from object Warning indicator Warning sound Instrument cluster Infotainment system screen 60–120 cm (24–48 in) Buzzer sounds at regular intervals.

Kia EV6 2022-2026 Owner's Manual: Integrated memory system: (if equipped)

The integrated memory system in the Kia EV6 allows the driver to conveniently store and recall personalized driving settings using simple one-touch button controls. This advanced comfort feature helps multiple drivers quickly restore their preferred seating and driving positions without requiring repeated manual adjustments. Driver’s seat position Outside rearview mirror position (if equipped) Head-Up Display (HUD) settings and height adjustment (if equipped) Steering wheel position and adjustment settings (if equipped) The Kia EV6 integrated memory system is especially useful when the vehicle is shared by multiple drivers with different seating preferences.